19/01/2016  - AX2010P/SW3XFP  - Presets for PC260 Release 2.2

These presets are to be used for processing AX2010P/SW36XFP systems with PC260 and HPX8000 power amplifiers.
All the presets are intended for the use of SW36XFP subwoofer flown ontop of the array.

STANDARD PRESET (name: AX2010P+SW36XFP_STANDARD v2_2.pcf)
This PRESET is suitable for vertical flown arrays that may range from 4 to 8 boxes or for the centre region of a bigger flown array. It can be used also for stacked arrays.

LONG THROW PRESET (name: AX2010P+SW36XFP_LONGTHROW v2_2.pcf)
This PRESET can be used in arrays bigger than 6 or 8 boxes and loaded in the top 1 or 2 boxes in order to obtain a more even distribution of the sound pressure, especially if they point very far away or to the upper deck of a large theatre.

SINGLE/DOWN-FILL PRESET (name: AX2010P+SW36XFP_DOWNFILL v2_2.pcf)
This PRESET, which features a much smoother high frequency response, can be loaded in the bottom boxes (usually 1 or 2 boxes) of a large flown array, in order to reach conveniently the audience close to the stage.
This preset could be very useful also when the box is used just on its own as a Front Fill element in the front of very large stages.